Engineering Economy 16th Edition Solution Manual Chapter 3
Engineering Economy Chapter 3: Cost Estimation Techniques Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The objective of Chapter 3 is to present various methods for estimating important factors in an engineering economy study. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Estimating the future cash flows for feasible alternatives is a critical step in engineering economy studies. Estimating costs, revenues, useful lives, residual values, and other pertinent data can be the most difficult, expensive, and timeconsuming part of the study. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Results of cost estimating are used for a variety of purposes. • Setting selling prices for quoting, bidding, or evaluating contracts. • Determining if a proposed product can be made and distributed at a profit. • Evaluating how much capital can be justified for changes and improvements. • Setting benchmarks for productivity improvement programs. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The two fundamental approaches are "top-down" and "bottom-up. " • Top-down uses historical data from similar projects. It is best used when alternatives are still being developed and refined. rough estimate, refer to previous cases • Bottom-up is more detailed and works best when the detail concerning the desired output (product or service) has been defined and clarified. details, accurate Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The integrated cost estimation approach has three major components • Work breakdown structure (WBS) • Cost and revenue structure (classification) • Estimating techniques (models) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Work Breakdown Structure (WBS) • A basic tool in project management • A framework for defining all project work elements and their relationships, collecting and organizing information, developing relevant cost and revenue data, and management activities. • Each level of a WBS divides the work elements into increasing detail. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
A WBS has other characteristics. • Both functional and physical work elements are included. • The content and resource requirements for a work element are the sum of the activities and resources of related sub-elements below it. • A project WBS usually includes recurring and nonrecurring work elements. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Cost and Revenue Structure • Used to identify and categorize the costs and revenues that need to be included in the analysis. • The life-cycle concept and WBS are important aids in developing the cost and revenue structure for a project. • Perhaps the most serious source of errors in developing cash flows is overlooking important categories of costs and revenues. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Estimating Techniques REMEMBER! The purpose of estimating is to develop cash -flow projections—not to produce exact data about the future, which is virtually impossible. Cost and revenue estimates can be classified according to detail, accuracy, and their intended use. • Order-of-magnitude estimates (± 30%) • Semi-detailed, or budget, estimates (± 15%) • Definitive (detailed) estimates (± 5%) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Figure 3 -5 Accuracy of Cost and Revenue Estimates versus the Cost of Making Them Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The level of detail and accuracy of estimates depends on • time and effort available as justified by the importance of the study, • difficulty of estimating the items in question, • methods or techniques employed, • qualifications of the estimator(s), • sensitivity of study results to particular factor estimates. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
A variety of sources (data) exist for cost and revenue estimation • Accounting records: good for historical data, but limited for engineering economic analysis. • Other sources inside the firm: e. g. , sales, engineering, production, purchasing. • Sources outside the firm: U. S. government data, industry surveys, trade journals, and personal contacts. • Research and development (R&D): e. g. , pilot plant, test marketing program, surveys. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
These models can be used in many types of estimates. • Indexes • Unit technique • Factor technique Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Indexes, I, provide a means for developing present and future cost and price estimates from historical data. k n Cn Ck = = reference year for which cost or price is known. year for which cost or price is to be estimated (n>k). estimated cost or price of item in year n. cost or price of item in reference year k. Indexes can be created for a single item or for multiple items (eqs. 3 -1, 3 -2). Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Pause and solve In 2002 Acme Chemical purchased a large pump for $112, 000. Acme keys their cost estimating for these pumps to the industrial pump index, with a baseline of 100 established in 1992. The index in 2002 was 212. Acme is now (2010) considering construction of a new addition and must estimate the cost of the same type and size of pump. If the industrial pump index is currently 286, what is the estimated cost of the new pump? Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Solution Cost of the new pump (using eq. 3 -1) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The unit technique is one that is widely known and understood. A "per unit factor" is used, along with the appropriate number of units, to find the total estimate of cost. An often used example is the cost of a particular house. Using a per unit factor of, say, $120 per square foot, and applying that to a house with 3, 000 square feet, results in an estimated cost of $120 x 3, 000 = $360, 000. This techniques is useful in preliminary estimates, but using average costs can be very misleading. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The factor technique is an extension of the unit technique where the products of several quantities are summed and then added to components estimated directly. C Cd fm Um = cost being estimated = cost of the selected component d estimated directly = cost per unit of component m = number of units of component m Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Parametric cost estimating is the use of historical cost data and statistical techniques (e. g. , linear regression) to predict future costs. Parametric models are used in the early design stages to get an idea of how much the product (or project) will cost, on the basis of a few physical attributes (such as weight, volume, and power). Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
The power-sizing technique (or exponential model) is frequently used for developing capital investment estimates for industrial plants and equipment (both in $ as of the point in time for which the estimate is desired) (both in the same physical units) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Pause and solve Acme Logistics provides "less than truck load" (LTL) services throughout the U. S. They have several hubs where they use cross-docking to move goods from one trailer to another. Acme built its last hub 10 years ago, and it had 36 dock doors. The cost index at that time was 140, and the total cost was $6 million. Acme plans a new hub that will have 48 dock doors. The cost index now is 195, and Acme will use a capacity factor of 0. 82. What is the estimated cost of the new hub? Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Solution Cost of the new hub (using eqs. 3 -1 and 3 -4) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
A learning curve reflects increased efficiency and performance with repetitive production of a good or service. The concept is that some input resources decrease, on a per-output-unit basis, as the number of units produced increases. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Most learning curves assume a constant percentage reduction occurs as the number of units produced is doubled. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Learning curve example: Assume the first unit of production required 3 hours time for assembly. The learning rate is 75%. Find (a) the time to assemble the 8 th unit, and (b) the time needed to assemble the first 6 units. Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
EXAMPLE 3 -7 Learning Curve (LC) for a Formula Car Design Team continued on next slide Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
EXAMPLE 3 -7 (continued) LC for a Formula Car Design Team Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling continued on next slide © Pearson Education Limited 2014 All rights reserved.
EXAMPLE 3 -7 (continued) LC for a Formula Car Design Team continued on next slide Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Example 3 -7 Spreadsheet Solution Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
A cost estimating relationship (CER) describes the cost of a project as a function of design variables. There are four basic steps in developing a CER. • Problem definition • Data collection and normalization • CER equation development • Model validation and documentation Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
TABLE 3 -2 Typical Equation Forms Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
EXAMPLE 3 -8 Cost Estimating Relationship (CER) for a Spacecraft continued on next slide Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
EXAMPLE 3 -8 (continued) CER for a Spacecraft Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Example 3 -8 (a) Regression Dialogue Box Figure 3 -7 Spreadsheet Solution Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Example 3 -8 (b) Regression Results (Spreadsheet) Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Figure 3 -8 Preliminary Learning Curve Model Figure 3 -9 Revised Learning Curve Spreadsheet Model Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Figure 3 -9 Revised Learning Curve Spreadsheet Model Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Figure 3 -10 Revised Learning Curve Spreadsheet Model Engineering Economy, Sixteenth Edition By William G. Sullivan, Elin M. Wicks, and C. Patrick Koelling © Pearson Education Limited 2014 All rights reserved.
Engineering Economy 16th Edition Solution Manual Chapter 3
Source: https://slidetodoc.com/engineering-economy-chapter-3-cost-estimation-techniques-engineering-4/
0 Response to "Engineering Economy 16th Edition Solution Manual Chapter 3"
Post a Comment